Forum

It would be nice to be able to control lasers in Capture using the IDN protocol (ILDA Digital Network). This would allow users to use more software for lasers. Especially as IDN is an open standard, so users are also able to write custom software which can output to lasers and to capture using the same protocol.

Hi, I have discovered an issue when a laser brightness fades out and the color is set to white it turns to green when it reaches low brightness in Capture. The virtual laser data comes from Pangolin Beyond and happens with all laser fixtures in Capture. So for me it is the Pangolin virtual laser inside Capture that causes that green tint. Could this bug be fixed Thanks.

We have some LCB 300 from Beamz and they Use a Simple Omega Lock as Line Connection and it would be nice to add some kind of Snapping for Fixutres that have such inbuild to alling them to each other just like Truss snaps to Truss but only for the Lamps.

I do manufacturing work that requires making estimates within a budget. It would be nice to have a column that could be user-assigned and add a total at the end. For example, we can assign a price for each fixture and capture adds at the bottom of the equipment report to see if it's within a budget.

Hi Capture, Understand that Capture got limitation to handle the 'Strobe' function on Capture for now. So is there any possibility to add limit function on 'Strobe' Rate on the fixtures properties, like the limit for 'Pan/Tilt'. So at lease we can fine tune the 'Strobe' on Capture to make it look more realities to the real fixtures. Currently the 'Strobe' on Capture are not easy to do pre programing cause the value send from console to Capture and real fixtures are totally different to ...

Hello, as requested via the support, an option in the setup to offset Artnet or sACN input would be great (exemple, I have 40 universes set on 1-0, 2-1 etc... and I want to assign all of them on 1-1, 2-2... 2 solutions.  - 1 I have an offset option in the connectivity settings - 2 I can select all my universes at once, tap enter and choose the first universe of my selection Thank you !

Hello All, This should be a great feature if we could continue to work on capture project even if a popup windows is  open. Especially on Connectivity statyus, it's not possible yet to clik out on this popup windows to change somthing in the project. Same mate for Serial patch or serial channel, you cna move on the view on a project if serial popup is open. This could be helpfull of it's become possible.

Dear Capture and Users, i would like to request a feature for more efficiency. I would like to have the possibility that fixtures which are hanging on a truss should move with the truss when the truss is moved in the software. At the moment I have to select every Fixture and the truss before moving it. That would be great, if you are going to implement this feature. Thanks in advance!

Hi, Appologies if this has been mentioned but quite new to this I'm creating my plan however we have just got Colorsource Spot back engines with Fresnel adapters, how do i do this on the fixtures or is there a fixture symbol etc for this to put on a lighting truss Thanks in advance