New Member
Posts:
| 2012-11-09 11:48 |
|
|
I need to print some plots in a drawing that someone else has made. Whatever I do the plots currently have no fixtures shown in them, just the truss and risers, where do i turn the fixtures on to be shown?
|
|
|
Veteran Member
Posts:157
| 2012-11-09 12:06 |
|
|
Sounds like your fixtures are not included in the "layer set" that your plot is using.
If you click on the plot, at the bottom left you will see an option to change the layer set.
Alternatively, see what layer set it is using and then go back to the main layout, select layer sets from the bottom right screen and add your fixtures layers.
I hope this helps.
|
|
|
New Member
Posts:
| 2012-11-09 13:01 |
|
|
I have done all I thought would sort it out, I started the plot and then someone took it on to do other work with it and now we are trying to print for the crew.
What I see in layer sets is my main layer, all the layers are ticks and I cannot un-tick them or so anything with them, likewise if I create a layer set I can tick anything. I already had the correct layer set in the plot which i thought would solve it.
|
|
|
Staff Member
Posts:2016
| 2012-12-01 10:23 |
|
|
Hi reen,
Another option is to not select a layer set in a plot - then everything is always drawn, unless it has been hidden. Hidden objects may still be visible in views if the view has the "Show hidden objects" setting on. Hiding object is considered part of the 'Scenes' functionality, but can be done even without scenes.
Technical Director
Capture Visualisation AB
|
|
|