|
Hi there it is realy simple !
After patching your fixtures in Jands the only thing you need to do is, go to the connect universe , add an artnet connection if your working on the same computer then you will need to assign to each artnet line ,a dmx universe numbering it as "1,2,3 ecc.."
Obviously if you are using 2 universes you need to create 2 artnet lines.
Once you have done that and connected all universes simply press ok.
Then Open up your capture and you will see that both dmx universes are present "the progect universes,and the external universes " select univers progect 1 to external 1 apply the connect to the selected progect univers, do the same for the second and that's it.
|