Search

Forum


Mojave not seeing streaming ACN or ETC Net
You are not authorized to post a reply.
New Member
Posts: New Member

--
2018-11-04 20:55

    Just upgraded my MacBook Pro and It is not seeing any signal from my GIO, I have confirmed I can both devices are on the same network. able to ping the GIO from the MacBook, and made sure streaming ACN and ETCnet is enabled on the GIO. I have also confirmed I am sending those signal with ETCnode and ENTTEC ethernet to DMX to a fixture. So I am assuming the issue is in the Mac. The firewall is turned off and no connection.

    Thanks for the help.,

    Advanced Member
    Posts:64 Advanced Member

    --
    2018-11-05 15:42
    Hello David.

    Have you tried Artnet?
    Is http://docsteer.github.io/sacnview/ receiving anything?

    Best regards.

    Alexander

    New Member
    Posts: New Member

    --
    2018-11-25 22:40

    I am having a similar issue although I do not believe mine is because of Majave because I was having the issue before upgrading. Here is what I am seeing and what I have tried:

    1. Environment
      1. MacBoc Pro
        1. I am using using Capture 24..1.15 on my MBP
        2. I am in Majave 10.14.1
        3. All firewalls turned off
      2. Dell All-in-One
        1. Windows 10
        2. ONYX Version 4.0.1010.0
        3. All firewalls turned off
    2. If I network everything together using my home wireless network everything works fine although with a slight delay between onyx and capture
    3. If I plug both into a Gigabit desk switch with hard coded IPs and Netmasks Capture does not see the external universe
      1. I need this to work with a wired switch because that is how I will be using it when doing events plus I do not want to slow it down because of wireless.
        1. I have reconfigured ONYX to use the correct adapter
        2. I have restarted capture
        3. I have tried it with Auto and selecting the correct adapter which it does see with configuring the universe in capture
      2. Now for the strange part. I can see everything with sacnview it just never displays (BSR E.131 Universe 2) under External Universe in Capture
        1. I am not using a hosts file or LMHosts file. But would not think I would need to plus it's working fine with sacnview
        2. I have not tired Artnet (I really don't want to use Artnet, plus SACN is working because I can see any changes in sacnview just not capture
      3. I have tried new cables, new a different switch and using both a cross over cable and a regular Ethernet cable directly between the laptop and desktop
      4. I also Installed ONYX in a fusion VM on the MBP and capture everything works perfectly. It only does not work when hardwired and not using DHCP between the windows machine and my MBP

    Thanks in advance for any advice!

    You are not authorized to post a reply.