14 Universes Tab

The Universes list contains the DMX universes configured for the current project. Capture automatically connects external universes discovered on the network to these universes. For a list of DMX and console connectivity protocols supported, see the Protocols appendix.

The External universe property can be used to override the assignment of external universes to universes in the project. It can also be used to see which external universes Capture is seeing.

The Patch base property lets you choose the numerical location of a universe in relation to the other universes, independent of its name.

In a theatrical environment it may be more convenient to work with a contiguous range of channel numbers (for instance 1 – 2048). This can be achieved by setting the Patch style property to Contiguous.

The Blind levels property controls how sACN and CITP “blind” DMX data is treated. Some consoles use this mechanism to transmit programmer DMX when programming in blind mode or as a means of previewing the next cue.

14.1 Console links

Some more advanced protocols such as CITP and OSC support transmitting and/or exchanging more than just DMX data. While Capture can receive DMX from many protocols and consoles simultaneously and assign theses various universes in the project, in the case of more advanced protocols it is only possible to link to one console at a time. Which console to link to is chosen using Project console link.

Some console link protocols support transmitting fixture patch data. When information about fixtures patched in the console but not in the current Capture project is available, the View fixture patch.. button reveals a list of these fixtures.

14.1.1 DMX talkback

This feature has historically often been called “autofocus”. The idea of autofocus is to control then pan and tilt values of fixtures by clicking to focus them in a 3D environment.

Technically this feature is accomplished by Capture transmitting individual DMX channel levels to the console. It is up to the console to decide whether to incorporate these values into the current output or not.

This functionality is available with:

• Consoles that support CITP/SDMX.
• EOS, using OSC.
• High End Hog 4, using the Hog connectivity driver.

Some consoles require that each fixture’s Channel property in Capture matches the channel number in the console in order for this to work. Refer to the console’s documentation.

14.1.2 Fixture selection

By synchronising fixture selection between Capture it becomes easier to perform operations on both systems. One such example is selecting a fixture group on the console and then focusing the fixtures (using DMX talkback) in Capture.

This functionality is available with:

• Consoles that support CITP/FSEL or CITP/CAEX.
• EOS, using OSC.
• High End Hog 4, using the Hog connectivity driver, but only receiving from the console.

Many (but not all) consoles require that each fixture’s Channel property in Capture matches the channel number in the console in order for this to work. Refer to the console’s documentation.

14.1.3 Fixture patch

Fixture patch information can be sent both from a console to Capture and from Capture to a console.

This functionality is only available with consoles that support CITP/FPTC or CITP/CAEX. Whether patch exchange only happens on request, automatically on startup or continuously throughout the session depends on the console’s implementation.

Many (but not all) consoles require that each fixture’s Channel property in Capture matches the channel number in the console in order for this to work. Refer to the console’s documentation.